BMX108

EXTREMES. FLAMBOYANCE. THOROUGHNESS.

A true powder ski, constructed for diverse and difficult terrain. The DUAL HOLLOWTECH and EARLY RISE ROCKER technology deliver unparalleled stability in powder.


The Kästle BMX108 is available in the following lengths:
168, 178, 188, 195

SHARE WITH YOUR FRIENDS

BMX108

K12 Ti 115 mm

K12 Ti 115 mm
Information
K12 Ti 115 mm

K18 Ti 115 mm

K18 Ti 115 mm
Information
K18 Ti 115 mm
  • DIN 8-18
  • magnesium housing
  • race diagonal release
  • Teflon AFD for maximum stability
BMX108 - Technology

Shovel geometric

Hook Free Shovel

Hook Free Shovel -

Sidecut

Dual Radius Big Mountain

Dual Radius Big Mountain -

Camber

Early Rise Low Camber

Early Rise Low Camber -

Tail

Powder Tail

Powder Tail -

BMX108

Dimensions

Length Weight Radius Flächengewicht
168 cm 1900 g/ski 24 m 1.01 g/cm²
178 cm 2050 g/ski 28 m 1.03 g/cm²
188 cm 2200 g/ski 32 m 1.04 g/cm²
195 cm 2350 g/ski 35 m 1.08 g/cm²

BMX108

Waist

Area Breadth
Tip 132 mm
Waist 108 mm
Tail 122 mm

Hollowtech

With the help of the HOLLOWTECH technology the ski‘s running characteristics is improved. The cutout section in the shovel leads to a reduced weight of the freely vibrating zone by almost 15 %. The resulting lower inertia moments optimize the retraction behavior of the ski. This means that after an impact the shovel returns much faster to the stable condition, enabling the ski to keep its track much more precisely. Hollowtech creates even greater weight savings on the TX touring skis. And the Dual Hollowtech on the XX Twintip skis, allows for the fastest rotation and most controllable spin.

WAIST 108 MM:

Outstanding handling in powder. The running surface gains about 64 % in comparison with a classic frontside ski. The combination of reduced weight with a broader waist cut guarantee the optimum uplift in powder.

SKI GEOMETRY:

The wider radius in the shovel of the DUAL RADIUS BIG MOUNTAIN delivers exceptional stability, while still being forgiving. The front radius exits the running track before the contact point, merging the shovel geometry in a straight line. The LOW CAMBER concept minimizes deep powder aggressiveness and provides a harmonious flex line in combination with EARLY RISE ROCKER. The ski has been reduced to a minimum of 5 mm, enabling greater manueverability. EARLY RISE ROCKER technology improves the uplift and enables a smoother handling under diverse snow conditions. The slight rise of the shovel in front of the traditional contact point enables better flotation. For the BMX108 the EARLY RISE ROCKER design starts at 360 mm. This indicates the length of the EARLY RISE ROCKER zone, measured from the tip of the ski in the direction of the waist.

WOOD CORE:

The core of this ski has been constructed from poplar (0.4 kg/dm³) and beech (0.8 kg/dm³) creating a lightweight, yet durable, ski. The core has been bonded with an adhesive block binder, in comparison with sheet binding, allowing further weight reduction through the reduction of binding components.

FEATURES:

Due to the fact that torsional rigidity may be reduced in deep powder snow, both sheets are made of fiberglass plastic (GRP). Additionally this ski is equipped with extremely impact resistant ABS sidewalls. A further reduction in weight has been achieved with the HOLLOWTECH technology that is not only applied in the shovel zone but also in the tail zone of the BMX108.

Your Tools

Dealersearch
Get your gear.
next
Product Finder
Find your perfect ride.
To Product Finder
close