BMX128

FREEDOM. INDEPENDENCE. PERFECTION.

A big mountain freeride ski made specifically for deep powder, steep lines and landing big air. The product that keeps you on top where others already sunk.


The Kästle BMX128 is available in the following lengths:
188

SHARE WITH YOUR FRIENDS

BMX128

K12 Ti 130 mm

K12 Ti 130 mm
Information
K12 Ti 130 mm

K18 Ti 132 mm

K18 Ti 132 mm
Information
K18 Ti 132 mm
  • DIN 8-18
  • magnesium housing
  • race diagonal release
  • Teflon AFD for maximum stability
BMX128 - Technology

Shovel geometric

Hook Free Shovel

Hook Free Shovel -

Sidecut

Dual Radius Big Mountain

Dual Radius Big Mountain -

Camber

Early Rise Low Camber

Early Rise Low Camber -

Tail

Powder Tail

Powder Tail -

BMX128

Dimensions

Length Weight Radius Flächengewicht
188 cm 2640 g/ski 40 m 1.10 g/cm²

BMX128

Waist

Area Breadth
Tip 146 mm
Waist 128 mm
Tail 134 mm

Hollowtech

With the help of the HOLLOWTECH technology the ski‘s running characteristics is improved. The cutout section in the shovel leads to a reduced weight of the freely vibrating zone by almost 15 %. The resulting lower inertia moments optimize the retraction behavior of the ski. This means that after an impact the shovel returns much faster to the stable condition, enabling the ski to keep its track much more precisely. Hollowtech creates even greater weight savings on the TX touring skis. And the Dual Hollowtech on the XX Twintip skis, allows for the fastest rotation and most controllable spin.

WAIST 128 MM:

Outstanding handling in powder. The running surface gains about 94 % in comparison with a classic frontside ski. The lightweight construction in combination with the increased waist presents a progressive, optimum powder ski.

SKI GEOMETRY:

The wider radius in the shovel of the DUAL RADIUS BIG MOUNTAIN delivers exceptional stability and forgiving running characteristics. The front radius exits the running track before the contact point, merging the shovel geometry in a straight line. The LOW CAMBER concept minimizes deep powder aggressiveness and provides a harmonious flex line in combination with EARLY RISE ROCKER. The ski pretension has been reduced to a minimum of 5 mm, enabling greater maneuverability in diverse snow conditions. The slight rise of the shovel in front of the traditional contact point enables better floating. For the BMX128 the EARLY RISE ROCKER design starts at 400 mm. The length of the EARLY RISE ROCKER zone, measured from the tip of the ski in the direction of the waist.

WOOD CORE:

The core of this ski has been constructed from poplar (0.4 kg/dm³) and beech (0.8 kg/dm³). This enables a very low weight of the ski. The core has been bonded with an adhesive block binder, in comparison with sheet binding, allowing further weight reduction through the reduction of binder components.

FEATURES:

Due to the fact that torsional rigidity may be reduced in deep powder snow, both sheets are made of fiberglass plastic (GRP). Additionally this ski is equipped with extremely impact resistant ABS sidewalls. A further reduction in weight has been achieved with the HOLLOWTECH technology that is not only applied in the shovel zone but also at the tail zone of the BMX128.

Your Tools

Dealersearch
Get your gear.
next
Product Finder
Find your perfect ride.
To Product Finder
close